Electrovalve Pt No: 96 119 952
Body casting Pt No: 96 170 335
Look under 'suspension' and then 'rigidity spheres'.
H
Elecrovalves
Moderator: RichardW
-
OnlineCitroJim
- A very naughty boy
- Posts: 49662
- Joined: 30 Apr 2005, 23:33
- Location: Paggers
- My Cars: Bluebell the AX, Polly the C3 Picasso, Pix the Nissan Pixo, Propel the duathlon bike, TCR Pro the road bike and Fuji the TT bike...
- x 6206
- Contact:
Yes, there's three Mike. 2 hydractive stiffness regulators and one Activa regulator.
The Activa one works opposite to the hydractive ones.
They're jolly expensive. In fact eyewateringly so...
You do you ask?
The Activa one works opposite to the hydractive ones.
They're jolly expensive. In fact eyewateringly so...
You do you ask?
Jim
Runner, cyclist, time triallist, duathlete, Citroen AX fan and the CCC Citroenian 'From A to Z' Columnist...
Runner, cyclist, time triallist, duathlete, Citroen AX fan and the CCC Citroenian 'From A to Z' Columnist...
-
OnlineCitroJim
- A very naughty boy
- Posts: 49662
- Joined: 30 Apr 2005, 23:33
- Location: Paggers
- My Cars: Bluebell the AX, Polly the C3 Picasso, Pix the Nissan Pixo, Propel the duathlon bike, TCR Pro the road bike and Fuji the TT bike...
- x 6206
- Contact:
Ahh, that's understood Mike and a good set of things to rescue
All three are mounted on their respective sphere blocks. Here's a picture of the front one on the Hydractive Centre sphere block down by the rad:
the rear ones are mounted on the Hydractive sphere block, that's the one on the RH side that sticks out at a 45 degree angle and the Activa one on the Activa sphere block right up in the LH top of the rear subframe. This last one is very hard to get to...
Here's a picture of a valve mounted on a sphere block:
Sorry I have no photos of the rear ones in-situ Mike, hope that helps...
All three are mounted on their respective sphere blocks. Here's a picture of the front one on the Hydractive Centre sphere block down by the rad:
the rear ones are mounted on the Hydractive sphere block, that's the one on the RH side that sticks out at a 45 degree angle and the Activa one on the Activa sphere block right up in the LH top of the rear subframe. This last one is very hard to get to...
Here's a picture of a valve mounted on a sphere block:
Sorry I have no photos of the rear ones in-situ Mike, hope that helps...
Jim
Runner, cyclist, time triallist, duathlete, Citroen AX fan and the CCC Citroenian 'From A to Z' Columnist...
Runner, cyclist, time triallist, duathlete, Citroen AX fan and the CCC Citroenian 'From A to Z' Columnist...