blaupunkt stereo help please

i3 · Post by i3 » 01 Jun 2010, 02:41

any body know how i can get the blaupunkt ph1/d stereo in the xantia recoded or decoded? i dont know the code and i have used a code calculator myself, and got three other separate people to find out the code for me on a forum,, and we all get the same code which the radio is not accepting, which means it must have been reprogrammed to something else at some point...
therefore i require someone to reprogram it,,any ideas anyone?

Post by **CitroJim** » 01 Jun 2010, 05:31

This calculator is known to be a good 'un...

Worked for me twice now

Follow the instructions in the thread absolutely precisely

i3 · Post by i3 » 01 Jun 2010, 07:32

Jim,,the calculator is good indeed

,,,it works fine,,and i have followed the instructions exactly,,, i got the exact same code that three other people got,,,however,,as i mentioned,,it seems as though there is some further problem which requires the stereo to be connected to a computer for reprogramming/decoding/recoding....do you know any one that can help in this regard Jim?

DickieG · Post by **DickieG** » 01 Jun 2010, 07:37

I take it you know that having entered the code you must press button 6 to verify the code?

i3 · Post by i3 » 01 Jun 2010, 09:01

yes...i pressed 6 to verify the code,,,i think it may have got reprogrammed at some point therefore the code that is being generated by the serial number isnt working....?

citroenxm · Post by **citroenxm** » 01 Jun 2010, 10:10

The calculator only works if the stereo is absolutly ALL orgininal..

If its had work donw be a programmer in the past then it wont work from the Serial code!

Ive had a couple like this - due to that, written them off as spares... and bought others off the Bay..

Paul

i3 · Post by i3 » 01 Jun 2010, 11:05

thats why im looking for someone who can program it,,or a replacement one... i have out a wanted post in the for sales/wanted forum... no response yet,,,ive been searching ebay,,,but cant find any yet....any ideas?

citroenxm · Post by **citroenxm** » 01 Jun 2010, 12:39

oooooo

I could very well have one then!!!

Ill check the stocks and working conditions for you tonight!

Paul

Simon99 · Post by **Simon99** » 01 Jun 2010, 13:44

You should be able to get the correct code from this very helpful forum:
http://forum.eserviceinfo.com/viewforum.php?f=8
Have to register first then post make, model, serial number etc. of radio. You will have to remove unit to read serial number etc.
If your radio isn't accepting any more codes leave it swicthed on with ignition for a few hours until it reads "code" again.
Hope they can help.

Simon99 · Post by **Simon99** » 01 Jun 2010, 13:50

Ooops... think you may have already tried this.

Simon99 · Post by **Simon99** » 01 Jun 2010, 13:58

If this is the stereo from the mark 2 xantia I believe I read somewhere it may be coded to the ecu only to work with original car. Don't know if this is correct, maybe thinking of C5 stereo.

citroenxm · Post by **citroenxm** » 01 Jun 2010, 15:09

Simon99,

NO thats not the case with Xantias

Thats only the case with C5's onwards... Xantia Mk.2's still use the older "Code in the Radio" system.. and with the case of S2 Xantia Clarion units in they need the Code chip Reading .... and cannot be decoded from the serieal, like Blaupunkts...

Paul

DickieG · Post by **DickieG** » 01 Jun 2010, 19:23

If you cannot find a code for that radio don't throw it all away, certainly remove the facia if its OK as the displays are prone to going blank, it might come in handy.

Post by **CitroJim** » 01 Jun 2010, 20:08

I don't suppose, by any chance, the serial number is also on a label stuck to the printed circuit board?

i3 · Post by i3 » 01 Jun 2010, 21:25

?? i dont understand? what do you mean Jim? what is the printed circuit board?