hello
hope someone can tell me which side of the car the electrics terminate and is there a special connector, or just the usual termi blocks , i have almost fitted the bar and don't want to take the bumper of ever again haynes is rubbish i bought this on ebay good price very heavy duty the volcane had all the holes pre drilled just the bar was a little distorted.
thanks ian
zx volcane td towbar wiring
Moderator: RichardW
zx volcane td towbar wiring
zx volcane td
mg zt190+
cbr1100xx superblackbird
VFR**************[VIN obfuscated, can be read by forum staff]
cx500, to go.
mg zt190+
cbr1100xx superblackbird
VFR**************[VIN obfuscated, can be read by forum staff]
cx500, to go.
-
- Posts: 1111
- Joined: 20 May 2003, 18:38
- Location: In the clouds in the Land of South Saxons
- My Cars:
- x 2
If you can find one, as they are now obsolete according to PSA, there was a nice simple break-in plug connector that Citroen sold for the ZX range when fitting a towbar. All you did was disconnect the wiring harness at the rear of the car, fit in this plug, reconnect and it was all done. Last price I saw for this was >£40.
They were also available for Xantia and CX and maybe others.
There are other makes available for this plug as I currently use one on my ZX although I cannot ever recall seeing one advertised anywhere.
H
They were also available for Xantia and CX and maybe others.
There are other makes available for this plug as I currently use one on my ZX although I cannot ever recall seeing one advertised anywhere.
H
-
- Posts: 1111
- Joined: 20 May 2003, 18:38
- Location: In the clouds in the Land of South Saxons
- My Cars:
- x 2
The company that makes the break-in wiring harness is called Brink, based in Nuneaton, CV11 4NG. Pt number: 076153. This is for a single socket.
You always connect the wiring to the rear RHS lamp assembly, unless the harness is on the left!
If you want to wire it in using bridging connectors (Lucar blue clips) I can probably find you the connection diagram.
H
You always connect the wiring to the rear RHS lamp assembly, unless the harness is on the left!
If you want to wire it in using bridging connectors (Lucar blue clips) I can probably find you the connection diagram.
H
thanks handyman
i spoke to citroen my dealer and he felt that citroens after zx had port ,so hard wire in on r/h side ( offside) light unit , does the loom carry l/h side indicator etc here ,,or is it a strapper back for that .
thanks ian
i am ok re the wiring diagram etc ,thanks.
i spoke to citroen my dealer and he felt that citroens after zx had port ,so hard wire in on r/h side ( offside) light unit , does the loom carry l/h side indicator etc here ,,or is it a strapper back for that .
thanks ian
i am ok re the wiring diagram etc ,thanks.
zx volcane td
mg zt190+
cbr1100xx superblackbird
VFR**************[VIN obfuscated, can be read by forum staff]
cx500, to go.
mg zt190+
cbr1100xx superblackbird
VFR**************[VIN obfuscated, can be read by forum staff]
cx500, to go.
hello jgr1
i had a look at your pics of the bike, looks like a nice restoration, ihad plan to to do that on the cx500 but after spending a fortune on bits i still had a bike with problems it had been totally abused , the VFR**************[VIN obfuscated, can be read by forum staff], i have had for years it needs work but when honda made these they really built them well , this one i will leave in france i got the original twin cans for her from german ebay its in red and i love it. the blackbird i have had her for 5years it is a dream ride it still looks like new i fitted some remus oval carbons i will sell her ,it is just too quick , i am not heavy so i thought i might get her to 200 mph speedo reading and downhill wind pushing and a bit of bullshit but at 185 i got really scared,best bit is in london at the lights on the VFR**************[VIN obfuscated, can be read by forum staff] all 2 wheelers will try to race you but on the blackbird they just sit behind and wait,ha ha i get my pension in a couple of years.
best wishes ian
i had a look at your pics of the bike, looks like a nice restoration, ihad plan to to do that on the cx500 but after spending a fortune on bits i still had a bike with problems it had been totally abused , the VFR**************[VIN obfuscated, can be read by forum staff], i have had for years it needs work but when honda made these they really built them well , this one i will leave in france i got the original twin cans for her from german ebay its in red and i love it. the blackbird i have had her for 5years it is a dream ride it still looks like new i fitted some remus oval carbons i will sell her ,it is just too quick , i am not heavy so i thought i might get her to 200 mph speedo reading and downhill wind pushing and a bit of bullshit but at 185 i got really scared,best bit is in london at the lights on the VFR**************[VIN obfuscated, can be read by forum staff] all 2 wheelers will try to race you but on the blackbird they just sit behind and wait,ha ha i get my pension in a couple of years.
best wishes ian
zx volcane td
mg zt190+
cbr1100xx superblackbird
VFR**************[VIN obfuscated, can be read by forum staff]
cx500, to go.
mg zt190+
cbr1100xx superblackbird
VFR**************[VIN obfuscated, can be read by forum staff]
cx500, to go.