Urgent- crashed the xantia!
Moderator: RichardW
Urgent- crashed the xantia!
hi lads i hit the car tonight on the icey roads. damaged the rear driver's quarter panel and back door. also bent the rear suspension. mine's a 2001 hdi 90bhp, would parts from a 98 2.1 d turbo be the same? i know they both have discs on the back...
-
- Posts: 8061
- Joined: 30 Dec 2004, 23:10
- Location: Somewhere in North Wales, Anglesey
- My Cars: M reg Xm S2 2.1td Auto Exclusive. 269k and rising
L reg XM S1 V6 12v Manual SEi
L 94 XM 2.1 TD auto total resto
2008 Peugeot 207 Sw 1.6 16v hdi. 217k and rising
2010 Peugeot 207 SW 1.6 8v HDi 161k and rising - x 71
Agreed!
Infact even a rear frame from a 1997 Series 1 would do the job as long as it has anti sink and ABS...
Make sure the 2.1 frame has ABS fitted as the rear sensors are impossible to remove intact.. but rear frames are quite a doddle to remove, obviously the exhaust has to come off, then theres 4 pipes that run front to rear.
One goes accross the frame to the drivers side, 2nd and third goto the Height controll valve and anti sink valve, and the 4th goes to the passenger side, and theres a plastic low pressure return pipe thats just push fitted on the passenger side too.. unplug the ABS sensors, wich you can do once the rear sub frame is lowered.. make sure all pipes are clear and remove from from under the car.
You'll need to remove exhaust back box and the cross bar from the car.. and possibly the wheel well for access to the pipes..
Paul
Infact even a rear frame from a 1997 Series 1 would do the job as long as it has anti sink and ABS...
Make sure the 2.1 frame has ABS fitted as the rear sensors are impossible to remove intact.. but rear frames are quite a doddle to remove, obviously the exhaust has to come off, then theres 4 pipes that run front to rear.
One goes accross the frame to the drivers side, 2nd and third goto the Height controll valve and anti sink valve, and the 4th goes to the passenger side, and theres a plastic low pressure return pipe thats just push fitted on the passenger side too.. unplug the ABS sensors, wich you can do once the rear sub frame is lowered.. make sure all pipes are clear and remove from from under the car.
You'll need to remove exhaust back box and the cross bar from the car.. and possibly the wheel well for access to the pipes..
Paul
Sharing a pug 207 1.6 hdi Sw 16v.
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto
M reg Xm 2.1 td auto exclusive S2 269k and rising
L reg XM V6 12v SEi auto .. Light project
A very sad...
1994 XM 2.1 d auto