Help with Torque Wrench Setting

rory_perrett · Post by **rory_perrett** » 05 Jul 2008, 20:44

Does anyone know the torque wrench setting for the antiroll bar drop link nuts on a 2000 Xantia. Thanks in advance.
Rory

Post by **CitroJim** » 05 Jul 2008, 22:21

Hi Rory,

30 ft lb for M10 nuts and 52 ft lb for M12 nuts according to the BoL..

I don't generall use a torque wrench on these. Just do them up to a sensible tightness. Good and tight with the appropriate ring spanner and they'll be fine...

rory_perrett · Post by **rory_perrett** » 05 Jul 2008, 22:46

Many thanks Jim.