chaps can anyone send me the wiring diagram for a Mark 1 Xantia, in particular, stereo wiring?
I cant find my PDF Xantia manual (I think it is on work computer )
thanks
John
Xantia wiring
Moderator: RichardW
-
- Donor 2023
- Posts: 183
- Joined: 09 Sep 2006, 05:46
- Location: Santiago, Chile
- Lexia Available: Yes
- My Cars: 2006 C5 II Exclusive V6
1996 Volvo 940 - x 5
I wrote the entry for Wikipedia some time ago.jgra1 wrote:Ross can you point me to it?
I searched on posts by you and nothing there that would relate to stereo wiring
http://en.wikipedia.org/wiki/Head_unit
- Ross_K
- Posts: 1055
- Joined: 18 Jul 2004, 22:26
- Location: Ireland
- Lexia Available: Yes
- My Cars: 2009 Citroen C5 VTR+ HDi 1.6
2004 Toyota Prius
2004 Alfa Romeo 156 1.6 Twin Spark - x 110
Here we go. It had been moved...jgra1 wrote:Ross can you point me to it?
I searched on posts by you and nothing there that would relate to stereo wiring
http://www.frenchcarforum.co.uk/forum/v ... hp?t=19735
You're right, the steering controls are on the third connector. I've never attempted chopping them so I couldn't tell you what each wire does. It's the one time I've actually forked out for an Autoleads connector
To the writer of that wikipedia entry, your speaker pinouts don't actually mean anything. Descriptions like 'Right rear 1' and right rear 2' don't really give the reader a clue what's going on. Why not say 'Right rear +' and 'Right rear -'?
-
- Donor 2023
- Posts: 183
- Joined: 09 Sep 2006, 05:46
- Location: Santiago, Chile
- Lexia Available: Yes
- My Cars: 2006 C5 II Exclusive V6
1996 Volvo 940 - x 5
Thats how the spec that I copied it from was written...Ross_K wrote: To the writer of that wikipedia entry, your speaker pinouts don't actually mean anything. Descriptions like 'Right rear 1' and right rear 2' don't really give the reader a clue what's going on. Why not say 'Right rear +' and 'Right rear -'?
Will check, thanks.
-
- (Donor 2021)
- Posts: 4625
- Joined: 27 Nov 2005, 19:07
- Location: Kent / Susssex
- My Cars: 2010 C5 X7 2.0 hdi 160 exc auto
MG TF 135
Boxer II 2.2 camper conversion
BMW R1200RT
BMW K1300 R
Honda V F R 800 5thG / MT500 Armstrong - x 39
ok i have managed to get the wiring diagram for the inside of the PH1D !!
on that third socket there are the following ...
pin 1 - CDC R
2 - CDC L
3 - CDC ground
4 - U5/REF
5 - A2
6 - A1
7 - RC BEL
8 - RC ground
Can someone translate these?
this brings up anothre question, on my V6 Xantia with multichanger, this top socket only looks like it has 3 wires... yet on older units without changer, there are more wires in this socket.
The steering wheel controls have 4 wires going in, (Mark1) and one, two of these must be switch illumination..
help
on that third socket there are the following ...
pin 1 - CDC R
2 - CDC L
3 - CDC ground
4 - U5/REF
5 - A2
6 - A1
7 - RC BEL
8 - RC ground
Can someone translate these?
this brings up anothre question, on my V6 Xantia with multichanger, this top socket only looks like it has 3 wires... yet on older units without changer, there are more wires in this socket.
The steering wheel controls have 4 wires going in, (Mark1) and one, two of these must be switch illumination..
help