With the onset of winter and a couple of near misses, i'm investing in a new set of tyres for my ZX, I was also wondering whether it's possible to fit ABS to a standard ZX and if so how easy is it to do? I admit to know nothing about ABS (ie how it works and what bits you need) so any insight would be greatly received!
Mark
DIY ABS??
Moderator: RichardW
-
Jon
To be honest, its not a practical option.
Off the top of my head you'd need
2 driveshafts with ABS rings
4 ABS sensors
Rear wheel bearings (with ABS rings), also on a ZX the ABS cars were all Disc brakes at the rear.
Master cylinder.
Wiring Loom.
ABS ECU.
Thats just for starters. All sounds a bit complicated to me.
Jon Wood
forum@andyspares.com
Off the top of my head you'd need
2 driveshafts with ABS rings
4 ABS sensors
Rear wheel bearings (with ABS rings), also on a ZX the ABS cars were all Disc brakes at the rear.
Master cylinder.
Wiring Loom.
ABS ECU.
Thats just for starters. All sounds a bit complicated to me.
Jon Wood
forum@andyspares.com
-
Thompatruck
- Posts: 50
- Joined: 23 Sep 2002, 18:31
- Location: Newcastle
- My Cars: