HEATER DISPLAY BULBS

WELSHVIKING · Post by **WELSHVIKING** » 02 Dec 2005, 19:04

All the bulbs seem to be out on the heater display on my xantia hdi sx, how easy a job is it to get behind the display and replace the bulbs and how many bulbs am i looking at...or hopefully it is a common problem which one of your fine members has a quick fix for......and yes i have tried knocking / belting / swearing and spitting at the dash but no response...thanks Colin

citronut · Post by **citronut** » 02 Dec 2005, 20:03

what about a welsh miners lamp on your helmet,ha ha ha,if they are like ZXones they are easy,just pop off the facure pull the bulbs out using pliyers gently so as not to brake the bulbs fit new ones bobs your whatsit dodars your aunt
regards malcolm

WELSHVIKING · Post by **WELSHVIKING** » 02 Dec 2005, 20:08

Thanks Malcolm, will have to see how easy it is to pop out theheater facia, sounds easy but i will bet its not, probably held in by a dozen screws which you can not possible get at......Colin

Jshodgson · Post by **Jshodgson** » 02 Dec 2005, 22:53

Mine have never worked and then after a year they came on a couple of weeks ago!!!! Now they need some gentle persuasion with my foot !!!

"Its character building, owning a Citroen"

Clogzz · Post by **Clogzz** » 04 Dec 2005, 11:00

WELSHVIKING wrote:probably held in by a dozen screws which you can not possible get at

Possibly not, the Haynes book has good pictures of that.
I fiddled with that years ago, and it was no rocket science.
The surround trim unclips easily, then there are 4 screws to undo, and it slides out.
If the globes twist into contacts tinned with solder, all of them may need a good scrape.