Hi, Can anyone tell me the wheel size for a xantia hdi sx " w" reg ?
thanks Colin
WHEEL SIZE FOR XANTIA
Moderator: RichardW
- WELSHVIKING
- Posts: 145
- Joined: 28 Nov 2005, 14:38
- Location: NORTH WALES COAST
- My Cars:
- x 4
Re: WHEEL SIZE FOR XANTIA
Guess it depends on the wheels fitted! 14" on steels & 15" alloys. The alloys run 195 55 15 and I've seen the steels with anything from 165 to 185 with varying 55-60 section. Then of course you can have all manner of aftermarket alloys & begged/borrowed one's off Fords Peugeots etc, aren't they 4x 108PCD...WELSHVIKING wrote:Hi, Can anyone tell me the wheel size for a xantia hdi sx " w" reg ?
thanks Colin
Think the SX will be sitting on 14" steels even on an W plate.
All the best,
Andrew
Last edited by andmcit on 02 Dec 2005, 00:26, edited 1 time in total.
Re: WHEEL SIZE FOR XANTIA
[/quote]
Guess it depends on the wheels fitted! 14" on steels & 15" alloys. [/quote]
Early Xantias had 14" steels,15" alloys,then from N/P reg,or all estates had 15" steels or alloys.
Guess it depends on the wheels fitted! 14" on steels & 15" alloys. [/quote]
Early Xantias had 14" steels,15" alloys,then from N/P reg,or all estates had 15" steels or alloys.
53`406 est SE Hdi 140,110k
Must admit, I've not had to do anything YET on my R reg facelift 2.0 16v Xant SX estate, but no doubt it has steels so probably HAS 15" ones on it!!np wrote:15" wheels.On the older Xantias,the tyre size was mainly 185/65/15,or for the pertrol turbo(?) & 2.1 TD it was 205/60/15.I think there may have been a few more size tyres,but those 2 were the main size.But yours should have 15" wheels with wheel trims.
All the best,
Andrew
All the old style "mk 1" Xantias i`ve seen,SX & VSX had 15" alloys the same as mine.The later "mk 2" facelift cars i`ve seen,its only the Exclusives with alloys.All the SX`s i`ve seen have wheel trims,the same style as the LX`s etc.It would apeer that Citroen decided to make the alloys a cost option on the face lift SX models,but they seemed to be standard fit on older SX`s .
Penny pinching i supose!
Cheers,Neil
Penny pinching i supose!
Cheers,Neil
53`406 est SE Hdi 140,110k
Posh Xantiae round your way then Neil!!np wrote:All the old style "mk 1" Xantias i`ve seen,SX & VSX had 15" alloys the same as mine.The later "mk 2" facelift cars i`ve seen,its only the Exclusives with alloys.All the SX`s i`ve seen have wheel trims,the same style as the LX`s etc.It would apeer that Citroen decided to make the alloys a cost option on the face lift SX models,but they seemed to be standard fit on older SX`s .
Penny pinching i supose!
Cheers,Neil
Round here I ONLY EVER see alloys on VSX's!!
Guess they would have been an option when new but more likely they'll have been ebayed for 20quid by handy owners who fit them on instead of the dimple edged bolt through wheeltrims that were shared with the LX's.
All the best,
Andrew
My last Xantia was a 1.9.TD SX and registered if memory serves me early 95 it was an N plate and ran on 185 x 65 x 14 tyres on steel wheels, later that year just before the P plate came out wheels changed to 15" and 195 x 55 x 15 tyres. My current Xantia is a 1.9TD sensation running on 185 x 65 x 15 tyres on non-standard alloys but the tyres are the correct size as listed on the sticker on door shut, hope this helps a little.
Peter
Peter
Citroen C5 2.0 HDI SX Hatchback - 2002 (52)
Xantia Sensation 1.9TD (T) Mallard Green (Gone to the breakers)
Xantia Sensation 1.9TD (T) Mallard Green (Gone to the breakers)
- WELSHVIKING
- Posts: 145
- Joined: 28 Nov 2005, 14:38
- Location: NORTH WALES COAST
- My Cars:
- x 4
thanks
205x60x15...had 2 fitted...thanks again
CURRENT CARS:-
2019 CITROEN C3 AIRCROSS 1.2 FLAIR PURETECH 110BHP MANUAL (WIFES CAR)
2020 CITROEN AIRCROSS 1.2 FLAIR PURETECH 130BHP AUTO (MY CAR)
2019 CITROEN C3 AIRCROSS 1.2 FLAIR PURETECH 110BHP MANUAL (WIFES CAR)
2020 CITROEN AIRCROSS 1.2 FLAIR PURETECH 130BHP AUTO (MY CAR)