Hi can anyone tell me will the wheels from a Xantia fit a XM or a C5 or vice versa I know the tires wont be the same size but will the Hubs Fit?????
Thanks
J.J.
Wheels?????
Moderator: RichardW
-
- Posts: 803
- Joined: 31 Oct 2001, 02:36
- Location: South Bucks
- My Cars:
http://www.kompressor.no/felger/boltesirkel.htm
Try this site for a compatability test.
CITROEN Xantia 93- PCD=4-108 18: HUB Ctr=65,1 Bolt=B12x1,25
CITROEN XM 89- PCD=5-108 45: HUB ctr=65,1 Bolt=B12x1,25
Hub Centre is the same though as Richard says a 5 bolt hub rather than 4, PCD is different, bolt Ctr also the same. May cayse some fouling problems especialy on full lock. Cant comment on the C5. Pug 605 wheels should fit an XM, but again check the offset.
<font size="1">
Edited due to fat fingers!</font id="size1">
Try this site for a compatability test.
CITROEN Xantia 93- PCD=4-108 18: HUB Ctr=65,1 Bolt=B12x1,25
CITROEN XM 89- PCD=5-108 45: HUB ctr=65,1 Bolt=B12x1,25
Hub Centre is the same though as Richard says a 5 bolt hub rather than 4, PCD is different, bolt Ctr also the same. May cayse some fouling problems especialy on full lock. Cant comment on the C5. Pug 605 wheels should fit an XM, but again check the offset.
<font size="1">
Edited due to fat fingers!</font id="size1">