Xantai, new key remote programing

This is the Forum for all your Citroen Technical Questions, Problems or Advice.

Moderator: RichardW

Post Reply
MarkS
Posts: 24
Joined: 10 Oct 2002, 19:48
Location: United Kingdom
My Cars:

Xantai, new key remote programing

Post by MarkS »

Hi, I have a 96 Xantai TD, I have a new Citroen remote key and apparently I can programe it to work woth my car. anyone know how, please.
MarkS
shaunthesheep
Posts: 364
Joined: 16 Jul 2002, 14:42
Location: United Kingdom
My Cars:

Post by shaunthesheep »

mark,
i found this info by doing a search on this forum
try this-
It's very simple....
1. Turn ignition to position M but do not start the car.
2. Hold the new plip very close to the sensor in the roof and press button A for a few seconds.
3. Turn the ignition off and try the newly configured plip.
hope this helps you
dom
rickity
Posts: 7
Joined: 05 Oct 2002, 05:20
Location: United Kingdom
My Cars:

Post by rickity »

If you have 2 keys you have to hold both up to the sensor at the same time and plip them both at the same time. other wise the new key will work and the old one won't . found this out the hard way.
Rickity
Post Reply