xantia clutch cable jobbie.

bonnie the botch · Post by **bonnie the botch** » 22 Jun 2005, 01:06

hello all, hope you can help, have a 1.9td xantia 96 n , the clutch cable came off at the pedal assembly end as a result of the spring clip failure and breakage the plastic jobbie that goes with this is missing. the cable is of the mech flavourand apears to be un-broken, but we cant see how the clip and plastic bit goes back on ,Q1, is there a specific tool for this task, Q 2 does the whole pedal assembly have to come out to do the job. any advice welcome thanks in advance

AndersDK · Post by **AndersDK** » 22 Jun 2005, 01:08

Bet if you do a search on the subject - it will come out as an all time winner in terms of massive postings [:D]

bonnie the botch · Post by **bonnie the botch** » 22 Jun 2005, 01:12

thanks anders , i take then that the problem is a common one.

PowerLee · Post by **PowerLee** » 22 Jun 2005, 01:14

The problem is very common, The 2 x parts are really really expensive too!
Not really, Your looking at under £5 for both bits from the main dealer! lol

AndersDK · Post by **AndersDK** » 22 Jun 2005, 01:15

Yes !