anti rollbar HC clamp rear

captain scarlet · Post by **captain scarlet** » 09 Apr 2005, 19:17

Hi I have now had a good look under my car and have discovered that the suspension <b>plastic link</b> is intact but the metal link to the anti roll bar clamp has broken. How does the clamp come off? Any tips on replacing this part would be a great help.
Thanks

Richard Gallagher · Post by **Richard Gallagher** » 09 Apr 2005, 19:29

The clamp is removed simply by undoing the securing bolt then turning the clamp.

Richard Gallagher · Post by **Richard Gallagher** » 09 Apr 2005, 19:32

If you need to buy the clamp then it is £14.05 + VAT part number 5291 13.

AndersDK · Post by **AndersDK** » 09 Apr 2005, 20:54

Our friendly member Captain Stempy has made a schematic available :
http://mysite.wanadoo-members.co.uk/cap ... 366010.gif
( We dont show these large pic's here anymore [:I] )
As you can see the clamp can be opened and replaced no problem.

captain scarlet · Post by **captain scarlet** » 09 Apr 2005, 22:36

Thanks for your help guys.
I have got the offending clamp off, wasn't to bad. It is a nightmare trying to get the car on ramps when the rear suspension is on the floor.
Have to get the part on monday now local dealer closes on Sat. Doh!!
Again thanks for help.

spanners123456 · Post by **spanners123456** » 09 Apr 2005, 22:44

the clamps are different sizes saloon and estate i would change the plastic link as well just to be safe and modified clip