I've read on here that the 2.1 XUD11 is the same or similar block as the 1.9 (I guess the XU bit is a giveaway).
Does anyone have the bore / stroke for the 2.1 ?
When my engine gets hauled out for a recon / replacement it might be a better option than using the big 12v head.
Thanks
Stuart
2.1 Block - 1.9 Head
Moderator: RichardW
-
ActivaV6uk
- Posts: 650
- Joined: 20 Nov 2003, 16:51
- Location: United Kingdom
- My Cars: C5 X7 2.7 hdi
Past cars
Activa, silver MK1 (221bhp stock) stripped out with twin sparcos Evo seats. 95
Activa, light met red MK1 98
Activa, dark met red MK1 98
Activa, dark met blue MK1 (202bhp stock) 96
Xantia exclusive V6 auto 3l 98
Xantia 2l 8v auto
BX 4x4 GTi dark met silver
BX 4x4 GTi white
BX GTi 16v white fibre bumpers
BX GTi 16v black fibre bumpers
BX GTi 16v hurricane (doa)
BX DTR estate
Thanks,
So it's a bored & stroked version. I think I'll have a word with Ivor Searle to see if there's an overbore piston available for the 2.1. Providing the compression ratio is workable that would give me 86x88 and about 2050cc or 7 and a bit percent more than standard.
This is all abit speculative but the plan is to see how much more responsive it would be.
Stuart
So it's a bored & stroked version. I think I'll have a word with Ivor Searle to see if there's an overbore piston available for the 2.1. Providing the compression ratio is workable that would give me 86x88 and about 2050cc or 7 and a bit percent more than standard.
This is all abit speculative but the plan is to see how much more responsive it would be.
Stuart