Wiper Motor for XM
Moderator: RichardW
Wiper Motor for XM
Hi all. Happy New Year and wonderful motoring to you all[:D]
Can anyone help me locate a wiper motor for my XM please? It's a Bosch unit. Robin
Can anyone help me locate a wiper motor for my XM please? It's a Bosch unit. Robin
Have you tried the likes of www.247spares.co.uk ? There are a number of similar sites that have links to breakers.
Crooser, hi. I am near Cambridge and its the Estate. However have traced one from a spares company near Bristol who have posted one out today first class. 6 months warranty, £40 all in. Did it through an on line parts locator similar to the one beezer is suggesting. Took just 10 minutes from placing the enquiry to getting a phone call!
Citroen wanted £150.47 and the Bosch dealers here would not talk to me unless I had the actual motor and Bosch number!
Will wait & see what the replacement is like.
Best wishes both and thank you. All the best for 2005. Robin
Citroen wanted £150.47 and the Bosch dealers here would not talk to me unless I had the actual motor and Bosch number!
Will wait & see what the replacement is like.
Best wishes both and thank you. All the best for 2005. Robin
-
- Posts: 1260
- Joined: 01 May 2004, 19:49
- Location: United Kingdom
- My Cars: Current - Slightly modified 2016 Pug 308 Puretech 130 Allure
Past:
2003 - 206 GLX TU3JP & 206 SE ET3JP4
1995 - 405 Executive XU10J2
1996 - 406 GLX XU10J4R
1994 - 405 GTX XU10J2 - x 1
Bosch use a 10 digit ID number for EVERYTHING, Spares, Machines, Drawings, ABS units, ECUs, Everything! The whole Bosch world revolves around these 10 digit numbers.
Have a look on something Bosch made, Look for a 10 digit number on the ID plate or casing.
EG: X XXX XXX XXX
Without this number they wont help you!
With this number they will bend over backwards to help you!
Have a look on something Bosch made, Look for a 10 digit number on the ID plate or casing.
EG: X XXX XXX XXX
Without this number they wont help you!
With this number they will bend over backwards to help you!
Crooser, Happy New Year!
It is just the nozzle assemblies and the cable loom back to a plug in the engine bay or below the screen I think. I rather assume they must operate via a temperature sensor/switch of some sort unless you have a switch or something on the dashboard. I am hoping that the car is pre wired in the usual manner.
But yes that's what I am seeking. Cheers, Robin
It is just the nozzle assemblies and the cable loom back to a plug in the engine bay or below the screen I think. I rather assume they must operate via a temperature sensor/switch of some sort unless you have a switch or something on the dashboard. I am hoping that the car is pre wired in the usual manner.
But yes that's what I am seeking. Cheers, Robin