xantia brake control valve

Our most popular forum is for Citroën problems, discussions and chat.
Specialising in AX, BX, ZX, Xantia,C5, Xsara, Saxo and XM. CX, 2cv & Berlingo, all are welcome.NOT for selling cars/parts!

Moderator: RichardW

User avatar
Posts: 131
Joined: 22 Dec 2001, 22:52
Location: United Kingdom
My Cars:

xantia brake control valve

Postby ukmobileman » 09 Aug 2002, 04:55

my brake control valve on my xantia is loose ( i guess it should be secure!)it also leaks!! i am going to replace with new but how is it held on? ( haynes manual is somewhat vague!!)are the bolts undone from inside (under dash/near pedals) or do they undo from engine compartment? i haven't looked at it closely yet!
0 x

Moderating Team
Posts: 7439
Joined: 07 Aug 2002, 17:12
Location: United Kingdom
My Cars: '07 307 SW 1.6 HDi 110
'08 C4 Grand Picasso 1.6 HDi 110
x 108

Postby RichardW » 09 Aug 2002, 14:06

AFAIK the brake valve is bolted on from inside. Leak may just be a pipe union that needs tightening up - I had this on my BX when it failed an MOT - especially if the valve itself is loose - try tightning it up, and nipping up the unions to see if this cures the leak.
0 x

Aubrey Smith
Posts: 7
Joined: 26 Jun 2002, 17:28
Location: United Kingdom
My Cars:

Postby Aubrey Smith » 13 Aug 2002, 04:03

I had the same problem on my 94d Xantia.I found the bubber cover had split on the push rod. Which is part of the brake control valve in side the car. Also the nuts which holds the brake valve are behind the brake pedal.You can buy a repair kit.
0 x

Return to “Citroën”

Who is online

Users browsing this forum: Baidu [Spider] and 12 guests