ax brakes jamming on

Our most popular forum is for Citroën problems, discussions and chat.
Specialising in AX, BX, ZX, Xantia,C5, Xsara, Saxo and XM. CX, 2cv & Berlingo, all are welcome.NOT for selling cars/parts!

Moderator: RichardW

misterroy
Posts: 1
Joined: 05 Aug 2002, 22:43
Location:
My Cars:

ax brakes jamming on

Postby misterroy » 05 Aug 2002, 22:50

all the brakes on the ax are locking on, its not the master cylinder or the calipers, any ideas? Common problem?
thanks
misterroy
0 x

Dave Burns
Posts: 1934
Joined: 14 May 2001, 05:30
Location: United Kingdom
My Cars:

Postby Dave Burns » 05 Aug 2002, 23:41

If its got a servo pull the vacuum pipe off and if its a petrol plug the open pipe or the engine will have trouble running.
See if the brakes are then free, if so the valve on the servo is open to the atmosphere, it should only open when braking.
Can't think of anything else at the moment.
Dave
0 x

Ally
Posts: 1
Joined: 17 Aug 2002, 23:36
Location: United Kingdom
My Cars:

Postby Ally » 18 Aug 2002, 00:24

My wife has an AX that had the same problem.
It was caused by dirt fouling the rod that goes across the bulkhead from the back of the pedal to the servo.
It can be cleaned by passing a welding rod (or other piece of stiff wire) with a piece wool or string attached to one end through the sleeve with the rod inside and use the wool like floss to clean it out.
Hope this helps
Ally
0 x


Return to “Citroën”

Who is online

Users browsing this forum: Bing [Bot], Google [Bot], Yahoo [Bot] and 19 guests