Hello Again

A forum for new members to introduce themselves to the rabble already onboard. Not compulsory!
Tell us a little about yourself, lie if you have to but keep it to just an introduction, not a car discussion.

Moderator: RichardW

Post Reply
elma
Posts: 3745
Joined: 13 May 2007, 02:17
Location: United Kingdom
My Cars: Undisclosed
x 287

Hello Again

Post by elma »

Well after a short break I'm back.
I came home with an N reg 1.9td VSX today.
Very happy to be back, I'd given up on finding a decent Xantia again.
User avatar
CitroJim
A very naughty boy
Posts: 49617
Joined: 30 Apr 2005, 23:33
Location: Paggers
My Cars: Bluebell the AX, Polly the C3 Picasso, Pix the Nissan Pixo, Propel the duathlon bike, TCR Pro the road bike and Fuji the TT bike...
x 6180
Contact:

Re: Hello Again

Post by CitroJim »

Welcome back Elma :-D Wondered where you'd gone...

Great news on your new Xantia. Excellent!
Jim

Runner, cyclist, time triallist, duathlete, Citroen AX fan and the CCC Citroenian 'From A to Z' Columnist...
elma
Posts: 3745
Joined: 13 May 2007, 02:17
Location: United Kingdom
My Cars: Undisclosed
x 287

Re: Hello Again

Post by elma »

hiya Jim.

I've been plodding round in an LDV Pilot for the last 5 years or so.
It's been great, got a bed and a cooker in the back and powered by XUD9A.

However it failed it's MOT by a little too much this year so I'm lucky really.

The Xantias not bad but needs some love.
So far I've noticed,
1. All rear Spheres need replacing.
2. The pipe to the front Hydractive sphere leaks
3. The thermostat housing leaks and the thermostat isn't doing it's job very well.
4. Handbrake not too good.
5. Brakes binding.
6. Turbo doesn't make any noise or add power like it should.
7.Good clutch, bad thrust bearing.
8.Idle not quite right
9. Needs new N/S strut top
10.The Hydractive is definitely working on the front, don't know about the back yet as it rides like all 3 spheres are ruptured.
11 No rev gauge
12.Heater matrix leaking into NS footwell.
13.Power steering pump leaks.

I think 3 months down the line I'll have it fairly decent and within a year it'll be bang on.

It's driving straight and well though so shouldn't take long to sort out.
It's howling and pouring up here today though so I can't get stuck in just yet.
Really pleased I kept my sphere tool though!
Post Reply