How do I remove the facia panel covering the 3 heater controls. A cable has unclipped itself on the vent control and the heat control is not moving the heat control cable.
So I want to remove the heater control assembly, but can't remove the black panel to gain access.
Phase 2 306td 1996.
thanks
306 heater controls access ???
Moderator: RichardW
-
- Posts: 464
- Joined: 31 Jul 2002, 00:34
306 heater controls access ???
Ex 307 2.0Hdi 90 bhp 2003
Ex Grand C4 Picasso VTR+ 2008
Ex Vauxhall Insignia SRI 2.0 CDTi 2010
C4 Picasso 1.6 HDi VTR+ 2014
Ex Grand C4 Picasso VTR+ 2008
Ex Vauxhall Insignia SRI 2.0 CDTi 2010
C4 Picasso 1.6 HDi VTR+ 2014
-
- Posts: 203
- Joined: 26 Aug 2003, 16:37
You need to get a small flat screwdriver and carefully prise off the lower panel that surrounds the clock and fog light controls. There's then (IIRC) two screws that hold the bottom part of the upper panel in place.
Next, remove the stereo (make sure you've got the security code etc.) and remove the two nuts either side of the opening in the dash. I think they're 6mm and are VERY easy to drop into the black hole of the dash.
I think that's it; you should then have clear access to the screws that hold the heater controls in place 8)
Next, remove the stereo (make sure you've got the security code etc.) and remove the two nuts either side of the opening in the dash. I think they're 6mm and are VERY easy to drop into the black hole of the dash.
I think that's it; you should then have clear access to the screws that hold the heater controls in place 8)
Alex
2000 306 HDI GLX: http://oh.is.it/Pic/ViewAlbum.php?id=26
1994 306 XTdt: http://oh.is.it/Pic/ViewAlbum.php?id=25 (now sold )
2000 306 HDI GLX: http://oh.is.it/Pic/ViewAlbum.php?id=26
1994 306 XTdt: http://oh.is.it/Pic/ViewAlbum.php?id=25 (now sold )